Lade Inhalt...

Comparison of methods for the computation of wave forcing

The resulting motion of a slender offshore floating structure

Präsentation 2014 14 Seiten

Ingenieurwissenschaften - Bauingenieurwesen

Leseprobe

Table of Contents

Introduction

Floating Offshore Wind Turbine Model

Calculation of Wave Loads

Modified Morison Formulation

SESAM

FAST

Comparison of the Methods

Summary

Conclusion and Outlook

Background

Most of the energy worldwide is obtained by nonrenewable resources, e.g. coal, oil, natural gas, nuclear power Fossil fuels are limited in supply and are harmful to the environment Wind is a renewable energy resource Onshore wind power has been the fastest growing energy source Increasing demand of offshore wind turbines Higher wind energy production stronger and more constant winds at sea than onshore No interference with life on land

Comparison of methods for computation of wave forcing and resulting motion of a slender offshore floating structure

Background

Several prototypes of floating substructures were developed The most economical constructions for generating electricity in the open sea are the Spar-buoy the Tension Leg Platform the Barge Design of floating wind turbines depends on the simulation of the system behavior

illustration not visible in this excerpt

Goal of this thesis:

Presentation and comparison of different methods for calculating wave forces and resulting platform motions of a floating offshore wind turbine

Floating Offshore Wind Turbine Model - OC3 Hywind -

First full-scale floating platform for offshore wind turbines in deep water

The support platform is developed by the Norwegian oil corporation Statoil

Development within the so-called Hywind-project

In water depths from 120 m to 700 m

FOWT used in this thesis is the Hywind spar-buoy (OC3 Phase IV)

OC3 Hywind system is characterized by a deeply-drafted, slender spar-buoy with three mooring lines

illustration not visible in this excerpt

Source: Jonkman (2007)

OC3 Hywind System

Comparison of methods for computation of wave forcing and resulting motion of a slender offshore floating structure

structural Properties of Tower and Platform Total height of 207.6 m Draft of the platform is 120 m Total mass of 7,716.048 tons Location of the COG at 89.9 m below MSL Thickness between 0.019 m and 0.027 m

illustration not visible in this excerpt

[...]

Details

Seiten
14
Jahr
2014
ISBN (eBook)
9783668706149
Dateigröße
1.2 MB
Sprache
Englisch
Katalognummer
v425814
Institution / Hochschule
Gottfried Wilhelm Leibniz Universität Hannover
Note
1,0
Schlagworte
Offshore Floating Platform Wind Turbine SESAM DNV Morrison wave forces Platform motions

Autor

Teilen

Zurück

Titel: Comparison of methods for the computation of wave forcing